This cable set is intended for connecting battery chargers to Lithium batteries and/or for connecting (Victron) medium and large MPPT chargers. The cable set is equipped with M8 eyes for connection to a battery, accumulator or busbar and is 1 meter long. At the other end, pins are mounted that fit into the screw terminals of battery chargers or large MPPT chargers. The pins do not fit into the smaller MPPT chargers from Victron, for example. These are connected with thin copper wire.

The pins ensure good contact and prevent short circuits due to copper wires that can protrude from the screw terminals. The pins ensure a safe connection.

Double insulated battery cable, oil resistant and highly flexible
Conductor: Electrolytic / annealed copper (class 6)
Insulation (around the conductor): PVC (natural)
Insulating sheath: NBR PVC (RAL 3000 red / RAL 9005 black / RAL 2008 orange)
Cable surface: 10 mm²
Cable cross-section: 7.9 mm
Max. R (Ω/km): 1.91
Max. current: 64 A
Cable weight: 134 kg / 1 km cable
Bending radius: x10 outer diameter for fixed installation
Working voltage: 0.6 / 1 kV
Test voltage: 3.5 kV
Temperature range: -40 °C + 70 °C
Flame spread: IEC 60332-1-2
Standards:
- IEC 60811-1-1 insulation and sheathing materials, standard test methods; - IEC 60228 Conductor of insulated cable;
- IEC 62230 Spark test for electrical cables;
- IEC 60060-1 High voltage test techniques