Improved packing density, reliability and conversion efficiency

LONGi's smart soldering technology uses integrated segmented ribbons. The triangular section maximizes light capturing while the flat section reliably connects cells with reduced gap. Smart soldering technology reduces the tensile stress of the cell by 20%, enabling higher reliability.
Optimized electrical parameters
Fully compatible with inverters

The operating current of LONGi Hi-MO 5 module is about 13A. Including bifacial gain, the operating current remains within the maximum input current range of advanced inverters, hence there is no power generation loss.
Optimized module size
Perfectly matched with tracking systems

Hi-MO 5 module is compatible with mainstream 1P and 2P horizontal single axis tracking system. Bifacial module + tracking system can achieve the lowest LCOE in low latitude areas
Gallium-doped technology
P-type module with lowest LID

LONGi products use gallium-doped PERC cells. Better LID performance with stable, long-term power generation.
Double-glass with frame
The strongest bifacial module

Hi-MO 5 adopts bifacial double-glass with frame which provides exceptional strength for higher load capacity. Qualified for 5400Pa static load on the front when there is no cross-beam on the back of the module (as shown in the figure). Avoids shading loss due to cross-beam at the back of the module.

Features:
Maximum power (Pmax/W): 545W
Max. static load - front (e.g. snow and wind): 5400Pa
Max. static load - rear (e.g. wind): 2400Pa
Panel length: 2256 mm
Panel width: 1133 mm
Panel depth: 35 mm
Weight: 32.3 kg