Complete low-voltage ESS set with a Deye 6 kW single-phase hybrid inverter (2× MPPT) and a choice of 1 or 2 parallel-connected Motoma 51.2 V LiFePO4 home batteries of 16 kWh each (total 16–32 kWh). Ideal for self-consumption, peak shaving and emergency power (EPS) at 230 V.
Description
This ESS set pairs the flexible Deye 6 kW single-phase hybrid inverter with one or two Motoma 51.2 V LiFePO4 low-voltage batteries of 16 kWh each (total 16–32 kWh). Two independent MPPT inputs maximise PV yield, while the battery(ies) safely store surplus energy and can supply selected circuits via EPS during outages. Result: lower energy costs, higher autonomy and a robust, future-ready storage solution. Start at 16 kWh and easily scale to 32 kWh as your consumption grows.
Key features
• 48 V low voltage (LV) for safe, efficient home storage
• Deye 6 kW hybrid inverter with 2× MPPT for varied roof orientations
• 16–32 kWh capacity: 1–2× Motoma LiFePO4 16 kWh in parallel (M90 PRO, 51.2 V)
• Emergency power (EPS) for priority circuits (proper installation required)
• Smart energy management: schedules, maximise self-consumption, reduce peaks
• Long-life LFP chemistry with stable performance
• Ready for single-phase 230 V (EU); PV via inverter MPPTs
In the set
• 1× Deye 6 kW single-phase hybrid inverter (LV, 2× MPPT)
• 1× or 2× Motoma 51.2 V LiFePO4 home battery 16 kWh (total 16–32 kWh)
• Manuals; parallel interconnects and cable sets depend on installation (available separately/on request)
Technical snapshot (compact)
• Inverter: 6 kW AC, single phase, 2× MPPT, support for 48 V batteries
• Battery(ies): LiFePO4 51.2 V (≈320 Ah per 16 kWh module); 1–2 in parallel
• EPS: via dedicated outputs with correct protection and wiring
Applications
• Homes and small businesses
• Increase self-consumption, reduce peak demand, backup during outages
Installation & compatibility
• Installation by a certified electrician/solar installer recommended
• Check BMS communication (CAN/RS485) and correct (parallel) interconnect/cable kits
• For 48 V low-voltage batteries only (no HV)
• External energy meter/CT and separate backup circuits optional