Victron 50A Buck-Boost Non Isolated DC-DC Converter

SL307

New

0 Product in stock in our warehouse.

10 + Reserved; if you order more, it will be in our warehouse within 3 to 10 days.

After ordering here: 11/28/2026

Excl. VAT: € 504,09

€ 504,09

 tax 0% incl.

Tax incl.

Download

(If the downloaded document needs to be translate in another language: https://translate.google.com/?sl=auto&op=docs )

Data sheet

Manufacturing number ORI303050000

More info

Victron 50A Buck-Boost Non-Isolated DC-DC Converter – Fully Programmable High-Current 12V/24V Auxiliary Battery Charger for Smart Alternators

The Victron 50A Buck-Boost Non-Isolated DC-DC Converter is a powerful, durable and fully programmable DC-DC battery-charging converter designed to provide reliable and controlled charging of 12V or 24V auxiliary batteries from vehicle electrical systems. Developed specifically for modern vehicles equipped with intelligent alternators, including Euro 5 and Euro 6 engines with regenerative braking, this professional charging solution combines automatic buck-boost voltage regulation, high charging-current capacity, adjustable current limitation, engine-running detection, USB programming, CAN bus temperature-sensor support, LED status monitoring and integrated thermal management in a robust enclosure suitable for permanent installation.

With a maximum charging current of 50A in a 12V charging configuration and 25A in a 24V charging configuration, the Victron Buck-Boost offers a versatile solution for auxiliary battery installations in commercial vehicles, motorhomes, campervans, service vans, trucks, mobile workshops, marine applications and other battery-powered systems. Its broad 10–30V DC input and programmable 10–30V DC output ranges allow operation across compatible 12V and 24V electrical arrangements, while intelligent charging control helps maintain the selected output voltage when alternator voltage fluctuates during vehicle operation.

Key Features and Benefits

Intelligent Buck-Boost DC-DC Voltage Conversion

The Victron 50A Buck-Boost converter uses automatic step-up and step-down voltage regulation to deliver a controlled charging output from the vehicle's alternator and starter battery system. Unlike a conventional converter that can only increase or decrease voltage, its buck-boost design can regulate the output when source voltage is either higher or lower than the selected charging voltage.

This capability is particularly important in vehicles equipped with smart alternators, where charging voltage may vary significantly as a result of electronic engine management, regenerative braking and changing driving conditions. The converter compensates for these fluctuations, helping prevent excessive or insufficient voltage from reaching the auxiliary battery.

Its programmable output voltage range of 10–30V DC supports suitable 12V and 24V battery-charging configurations, provided the voltage, current limits and battery manufacturer's requirements are correctly established during installation.

Dedicated High-Current Charging for 12V and 24V Auxiliary Batteries

The converter is specifically designed to charge a second battery or service battery bank using controlled voltage and current, rather than simply providing an unregulated electrical output. It can be configured to charge an auxiliary battery from compatible 12V or 24V alternator and starter-battery systems.

In a 12V charging configuration, the 50A model supports a maximum charging current of 50A. For 24V charging, the maximum rated charging current is 25A. The manufacturer's manual additionally specifies 20A for its default 12V-input to 24V-output configuration, showing that actual current capability depends on the selected conversion arrangement.

This flexibility makes the converter suitable for vehicles with demanding auxiliary electrical systems and relatively large service battery banks, while allowing the installer to match charging performance to the available alternator power and battery requirements.

Automatic Engine-Running Detection and Starter Battery Protection

The Victron Buck-Boost includes an intelligent engine-running detection system that activates auxiliary battery charging when the engine is running and suitable electrical conditions are present.

This helps prevent the vehicle's starter battery from being deeply discharged when the engine is stopped. Programmable activation conditions and a time delay allow the converter to distinguish between active engine operation and unsuitable source-voltage conditions.

The feature is especially useful in Euro 5 and Euro 6 vehicles, where the voltage delivered by smart alternators may be insufficient for direct auxiliary battery charging even when the engine is operating.

Fully Programmable Operation with USB and TSConfig

The 50A Buck-Boost converter can be configured using Victron's TSConfig software on a compatible Windows PC through the unit's USB connection. The connection requires a USB Type-A to Type-B cable.

Through the configuration software, installers can adjust charging voltage, maximum charging current, maximum input current, activation conditions, engine-running detection timing and other operating parameters appropriate to the system design.

This flexibility is important for professional installations because it allows charging behavior to be matched to different battery technologies, alternator capabilities, wiring arrangements and electrical operating conditions rather than relying on one fixed configuration.

Adjustable Charging Current and Alternator Current Protection

The converter features programmable output-current and input-current limits, helping prevent excessive demand on the vehicle's alternator and electrical system.

Charging performance is determined by the configured maximum charging current, the permitted input current and the converter's programmed operating-temperature limit. The device can automatically reduce charging current when its internal temperature approaches the configured maximum.

This is particularly beneficial when charging compatible lithium batteries, which can otherwise draw high charging currents and potentially overload an alternator that was not designed to charge a low-resistance auxiliary battery without controlled current limitation.

Wide Input and Output Voltage Range for Flexible Vehicle Systems

The converter operates with a specified input voltage range of 10–30V DC and a programmable output voltage range of 10–30V DC, supporting a wide selection of compatible 12V and 24V applications.

Its specified undervoltage threshold is 10V. Programmable activation conditions and engine-running detection add further control over when battery charging should begin or stop.

The automatic buck-boost design maintains the selected output voltage despite appropriate fluctuations in the source supply, making it particularly valuable in modern vehicles where direct connection between the alternator and auxiliary battery may not deliver a suitable charging profile.

Programmable Remote Activation and CAN Bus Temperature Support

The 50A converter can be activated automatically through engine-running detection or through an appropriate programmable input associated with vehicle ignition, D+ signals or compatible control arrangements.

Its pin 1 activation connection uses the purple wire, has an activation threshold above 2V and accepts a maximum input voltage of 30V. Configurable auxiliary output pins can also support suitable external control functions.

Unlike the 25A version, the 50A Buck-Boost includes CAN bus functionality for communication with a compatible CAN bus temperature sensor. This enables additional temperature-related integration where the appropriate Victron accessory and configuration are used; it should not be confused with unrestricted support for every CAN bus control or monitoring system.

LED Status Monitoring and Diagnostic Information

The converter includes separate multicolour input and output status LEDs that provide useful information about operation, battery condition and charging availability.

The input LED can indicate normal converter operation, low input voltage, excessive temperature, detection of a running engine with delayed startup, and activation blocked because the source voltage is too low.

The output LED indicates conditions such as a normal battery voltage, low battery voltage, a discharged or disconnected battery, and active converter operation. These visual signals help installers and users carry out basic checks and understand why charging is active or temporarily unavailable.

Non-Isolated Construction and Robust M8 Power Connections

This converter uses a non-isolated electrical design, meaning the input and output circuits are not galvanically separated. A properly designed common-ground arrangement is therefore essential when connecting the vehicle starter system and the auxiliary battery installation.

The unit uses clearly identified IN, GND and OUT terminals with M8 power connections for secure installation in higher-current vehicle electrical systems. The manufacturer's installation manual emphasizes connecting and checking the ground connection before attaching the positive cables.

Correct polarity, suitable external input and output fuses, appropriately dimensioned cables and secure electrical mounting are essential. The converter does not have reverse-polarity protection, so incorrect wiring can damage the unit.

Durable Construction, Thermal Management and Low Standby Consumption

The Victron 50A Buck-Boost converter has a robust, low-profile housing with datasheet dimensions of 213 × 120 × 30mm and a weight of approximately 1.4kg. This makes it suitable for permanent mounting in protected electrical compartments in vehicles and professional mobile installations.

The specified operating temperature range is −25°C to +60°C. Programmable thermal limits and temperature-dependent current regulation help manage converter operation and reduce excessive thermal loading during demanding charging conditions.

In power-saving mode, when the converter is off and both status LEDs are off, power consumption is approximately 7mA. Adequate ventilation, correct installation, appropriate overcurrent protection and protection against excessive moisture are important for dependable long-term performance.

Technical Specifications

  • Manufacturer: Victron Energy

  • Product name: Buck-Boost DC-DC Converter 50A

  • Manufacturer product code: ORI303050000

  • Product type: Fully programmable, non-isolated buck-boost DC-DC battery charger

  • Primary application: Charging 12V or 24V auxiliary/service battery banks

  • Supported vehicle electrical systems: Compatible 12V and 24V systems

  • Smart alternator compatibility: Yes, including Euro 5 and Euro 6 vehicles

  • Input voltage range: 10–30V DC

  • Undervoltage threshold: 10V

  • Programmable output voltage range: 10–30V DC

  • Maximum charging current at 12V: 50A

  • Maximum charging current at 24V: 25A

  • Default 12V-to-24V conversion maximum: 20A, according to the manufacturer's manual

  • Buck-boost voltage regulation: Yes, automatic step-up and step-down

  • Galvanic isolation: No, non-isolated construction

  • Automatic engine-running detection: Yes

  • Programmable activation delay: Yes

  • Adjustable charging voltage: Yes

  • Adjustable maximum charging current: Yes

  • Adjustable input current limitation: Yes

  • PC configuration software: Victron TSConfig

  • PC configuration connection: USB

  • USB cable required: USB Type-A to Type-B

  • External activation input: Yes, programmable

  • Pin 1 activation wire: Purple

  • Pin 1 activation threshold: Greater than 2V

  • Maximum activation input voltage: 30V

  • Auxiliary control connections: Configurable pins 1 and 2

  • Auxiliary pin output voltage when activated: Equal to input voltage

  • CAN bus connection: Yes, for compatible CAN bus temperature-sensor communication

  • Input operating status indication: Multicolour LED

  • Output/battery status indication: Multicolour LED

  • Optional battery-temperature monitoring: Yes, with compatible CAN bus sensor

  • Automatic thermal current limitation: Yes, according to programmed temperature settings

  • Power-saving consumption, converter and LEDs off: 7mA

  • Main DC power terminals: IN, GND and OUT

  • Electrical connection hardware: M8 power terminals

  • Reverse-polarity protection: No

  • External circuit fuses: Required on input and output, according to installation requirements

  • Manual's typical 12V input/output fuse value: 60A

  • Manual's typical 24V input/output fuse value: 40A

  • Manual's cable-section guidance for cable runs under 5m: 35mm², subject to installation verification

  • Operating temperature range: −25°C to +60°C

  • Weight: 1.4kg

  • Datasheet dimensions (H × W × D): 213 × 120 × 30mm

  • Documented standards: EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3, EN 55014-1, EN 55014-2, EN 50498, EN-IEC 62368-1 and EN-IEC 63000

Recommended Applications

The Victron 50A Buck-Boost Non-Isolated DC-DC Converter is particularly suitable for modern motorhomes, campervans, commercial vehicles, trucks, service vehicles, mobile workshops and other vehicle electrical installations equipped with intelligent alternators. It creates a controlled charging connection between the alternator/starter battery system and a compatible 12V or 24V auxiliary battery or service battery bank.

It is especially valuable in Euro 5 and Euro 6 vehicles where smart alternators may reduce or vary their voltage even while the engine is running. The converter's automatic engine-running detection, programmable voltage regulation and adjustable input/output current limits allow auxiliary battery charging to be managed without depending on a constant alternator voltage.

The 50A model is also well suited to appropriately designed installations using compatible lithium batteries, where the alternator must be protected from excessive charging-current demand. Its optional CAN bus temperature-sensor support, thermal current limitation and PC programming provide additional flexibility when integrating larger auxiliary energy systems.

Unlike the previously described isolated Orion-Tr voltage converters, this device is a dedicated, fully programmable auxiliary battery charger with no galvanic separation between input and output. Its combination of high charging-current capability, intelligent engine-running detection, USB configuration, CAN bus temperature integration, LED diagnostics and robust M8 electrical connections makes it a professional solution for correctly grounded 12V and 24V vehicle battery systems.

The Victron 50A Buck-Boost Non-Isolated DC-DC Converter delivers powerful and controlled auxiliary battery charging, fully programmable 12V/24V buck-boost voltage conversion, automatic engine-running detection, adjustable alternator current protection, convenient USB configuration, CAN bus temperature-sensor support and dependable thermal management in a durable professional device developed for demanding modern vehicle electrical installations.

  • Reviews (0)
  • Wees de eerste om een recensie te schrijven !

    Also Bought Products

    30 other products in the same category