SmartSolar Charge Controllers with VE.Can interface
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in cloudy skies, when light intensity is constantly changing, an ultra-fast MPPT controller will improve energy storage by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in the Case of Partial Shade Conditions When partial shade occurs, two or more Maximum Power Points (MPP) may be present on the supply voltage curve.
Conventional MPPTs tend to latch to a local MPP, which may not be the optimal MPP.
The innovative SmartSolar algorithm will always maximize energy storage by locking to the optimal MPP.
Excellent conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charging algorithm
Fully programmable charging algorithm and eight pre
Programmed algorithms, selectable with a rotary switch (see manual for details).
Comprehensive electronic protection
Over-temperature protection and power derating when the temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Built-in Bluetooth Smart
The wireless solution to set up, manage, update and synchronize SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in the case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Fully discharged battery recovery function Will start charging even when the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with internal shutdown function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronized with VE.Can and up to 10 units with Bluetooth
Remote on/off function
For example, to connect to a VE.BUS BMS.
Can be programmed to disarm in the event of an alarm
or other events.
Optional: SmartSolar Pluggable LCD Display Simply remove the rubber seal protecting the plug on the front of the controller and plug in the display.